CUSTOM PARTS · FROM YOUR MODEL
3D print an enclosure from your design.
Turn your enclosure model into a physical part to review its shape, openings and fit. Send the file with its intended use and important dimensions for a reviewed UK 3D printing quote.
Start with the enclosure's job
Tell us what the enclosure will hold, where it will be used and how it will be handled. Include any heat, load or exposure requirements that could affect material selection.
If you are checking a new design, explain what the first print needs to prove: access to a connector, space around a component, mounting positions or how a lid fits the body.
Send the parts that need to fit
Provide a clearly named file for each part, with quantities and revisions. Identify the dimensions and clearances that matter on a drawing or in your notes.
For a body and lid, explain the intended assembly. Flag mating surfaces, locating features, fastener holes and areas that should remain accessible.
What to include with your model
- Openings and access: note connector cut-outs, cable exits and any access needed after assembly.
- Mounting points: identify holes, slots and contact surfaces whose position or fit matters.
- Separate parts: list the quantity of each body, lid, bracket or other component.
- Visible surfaces: tell us which faces will be on show and your preferred colour and finish.
- Operating conditions: describe the intended environment and any specific material requirements.
Send a drawing or dimensioned notes alongside the model where useful. The estimator can show the file's overall size, but it cannot determine the clearance your assembly needs.
Choosing a material for an enclosure
Filament printing offers PLA, PETG and ABS. PLA is a starting point for visual prototypes and shape checks. PETG is an option to discuss for practical parts and enclosures, while ABS may be considered for functional prototypes with more demanding requirements.
Share the actual use and operating conditions before settling on a material. Read the material and finish guide for the available options. A printed enclosure is not automatically suitable for every environment or application; its design and specification need review.
Review fit before ordering more
For a new design, consider starting with one part or a small set. Check the openings, mating surfaces and assembly before requesting a repeat batch. Ask about a sample when you enquire; any sample cost and extra time are agreed in advance.
Keep each revision clearly named. If a dimension changes after the quote, send the updated model for review before production. Our prototype printing guide explains how to brief a first physical iteration.
Understand the printed finish
Filament prints have visible layer lines. Layer height and orientation influence their appearance, and supports can leave marks where they are removed. Identify the faces that matter most when requesting a quote.
The calculator lets you compare draft, standard and fine filament layers. Finer layers take longer and are not a guarantee of dimensional accuracy. Describe important fits and clearances separately from your finish preference.
Get an estimate from your enclosure file
The free 3D printing cost calculator accepts a closed STL or OBJ in millimetres and estimates 1–100 copies of that file. It runs locally in your browser. For a multi-part enclosure, send all files and their quantities for a combined manual quote.
Email STEP, 3MF, larger or more complex files for review. The online figure is an initial estimate; orientation, supports, final specification, delivery and any applicable tax are confirmed before you order. See pricing and worked examples for the current rates.
Have your enclosure model ready?
Choose one file for an initial estimate, or email your models with dimensions, quantities, delivery postcode and required date.
Estimate your enclosureDiscuss the requirements