Filament 3D printing for practical parts.
Turn your model into a prototype, enclosure or one-off part. Choose PLA, PETG or ABS and get a provisional estimate before sending your file for review.
Choose the material for the job
PLA suits display pieces and everyday prototypes. PETG is an option for practical parts and enclosures. ABS may suit projects with specific durability or heat requirements. Tell us how the part will be used so we can discuss the choice; a material name alone does not guarantee performance.
What does filament printing cost?
Orders have a £5 minimum, including a £2 setup fee per order. Estimated printing time is £0.50 per hour. Material rates are PLA £12/kg, PETG £15/kg and ABS £16.50/kg. The estimator includes a material allowance; supports, delivery and any applicable tax need review.
Layer height and finish
Choose Draft at 0.28 mm, Standard at 0.20 mm or Fine at 0.12 mm in the estimator. Printed layer lines remain visible. Smaller layers can improve detail but increase print time; they do not remove the need to check orientation and fit.
Getting a usable part
Include critical measurements and explain which surfaces or holes must fit another component. Strength depends on orientation, geometry and print settings as well as material. Discuss a sample first for a production batch or a part where fit matters.
FDM printing from your STL or OBJ
Filament printing builds the model in layers using a process commonly called FDM. At 3DToDoor, the available filament options are PLA, PETG and ABS. Start with a closed STL or OBJ file for an on-device estimate, or email STEP and 3MF files for manual review.
For a one-off enclosure or a prototype that fits another component, send the critical dimensions with your model. The materials guide explains the available settings, and our 3D printing cost guide shows how setup, material and printing time contribute to the estimate.
Have a model ready?
Upload a closed STL or OBJ in millimetres, up to 25 MB, for an estimate. Email STEP or 3MF files for manual review. Attach your model when sending your enquiry.
Get an initial estimateDiscuss your project